Refractive laser surgery

SMILE Pro Laser Eye Surgery – Denizli

SMILE Pro is a small-incision, flapless laser eye surgery method considered for correcting myopia and astigmatism in people with suitable eye structure. This page explains the method, suitability assessment and follow-up process within a scientific framework.

Diagram of the small corneal incision in the SMILE Pro method
Removal of the lenticule through a small incision — schematic illustration
Approach
No flap is created
Procedure
Minimal corneal incision
Decision
Personalized suitability assessment

In any surgical or interventional procedure, results may vary from person to person. It is recommended that you obtain a detailed opinion from your doctor before the procedure.

What is SMILE Pro?

SMILE Pro is a laser eye surgery performed with the ZEISS VISUMAX 800 system, based on removing a thin piece of tissue (lenticule), created inside the cornea with a laser, through a small incision. SMILE is the abbreviation of "Small Incision Lenticule Extraction." Unlike LASIK, a large corneal cap (flap) is not created; and unlike surface lasers, the epithelial layer is not removed over a large area.

Within the clinic's assessment framework, the method can be considered for myopia, astigmatism and, in suitable cases, hyperopia. The treatable range and the decision on the method are determined not only by the eye prescription but together with the current indications of the system used, the corneal structure and personal examination findings.

1

Flapless technique

No large cap is created on the corneal surface; the lenticule is removed through a minimal incision.

2

Personalized planning

Corneal mapping, thickness, eye prescription and ocular surface findings are evaluated together.

3

Controlled follow-up

As much as the surgical decision, post-procedure check-ups and adherence to the doctor's recommendations are part of the process.

What is the difference between SMILE and SMILE Pro?

Both approaches are based on the principle of removing a lenticule through a small incision. SMILE is associated with the VisuMax platform, and SMILE Pro with the newer VISUMAX 800 platform. The main differences lie in the laser's working speed and in systems that assist surgical planning. Use of the newer platform does not remove the need for examination, candidate selection and follow-up.

Is "10 seconds" the duration of the whole surgery?

No. ZEISS reports that, in myopia treatment with the VISUMAX 800, the time to create the lenticule with the laser is under 10 seconds. This time does not include preparation, positioning of the eye, removal of the lenticule by the surgeon or check-ups. The total procedure time varies according to the person and the treatment plan.

Source: ZEISS technical description of VISUMAX 800 and SMILE Pro

Who can be considered?

The decision for SMILE Pro is not made by looking only at the eye prescription. A detailed eye examination is necessary to determine whether the cornea is suitable for safe surgery and whether another method would be the more appropriate option.

What is looked at in the assessment

  • The eye prescription having been stable for a certain period
  • Joint evaluation of corneal thickness, topography/tomography findings and the corneal tissue that will remain after the procedure
  • Ocular surface and dry eye assessment
  • Retina and fundus examination
  • Age, occupation, sports habits and expectations

The prescription range that can be treated depends on the approved indications of the system used and on personal measurements. A single corneal thickness or prescription limit does not, on its own, indicate suitability for surgery.

Conditions that may limit suitability

  • Keratoconus or suspected/irregular corneal structure
  • Advanced ocular surface disease or uncontrolled dry eye
  • Active eye infection or inflammation
  • Uncontrolled systemic diseases and the use of certain medications
  • Prescription changes during pregnancy and breastfeeding
This list is for general information. The presence of a condition does not by itself mean definite suitability or unsuitability; the decision is made after a physician's examination.

The SMILE Pro process, from examination to follow-up

Detailed preliminary assessment

Visual acuity, corneal thickness and mapping, ocular surface, pupil and retinal findings are examined. People who wear contact lenses may be asked to stop wearing them for a certain period before measurements.

Personal surgical plan

Examination findings, occupation and lifestyle are evaluated together. If SMILE Pro is not suitable, other refractive surgery options and the reasons are explained.

Creation of the lenticule

After drop anesthesia, the femtosecond laser defines the anterior and posterior surfaces of the lenticule in the stromal layer of the cornea according to the personal refractive error. The dimensions of the lenticule and its position within the cornea are planned according to personal measurements.

Removal through a minimal incision

The lenticule separated by the laser is removed through a small corneal tunnel with microsurgical instruments. No large flap is prepared, and the incision closes naturally without sutures.

First check-up and follow-up

Personal recommendations are given on medication use, protecting the eye and returning to daily life. Follow-up intervals are determined according to examination findings.

Key differences between SMILE Pro, FemtoLASIK and No Touch

All three methods are current techniques used in refractive surgery. The main differences between them are how the cornea is accessed, how the epithelial tissue is treated and how the correction is applied.

FeatureSMILE ProFemtoLASIKTransPRK (No Touch)
FlapNoneYesNone
Removal of the epithelial layer over a large areaNone; a small entry incision is madeNone; a flap is createdRemoved from the surface with excimer laser
Corneal accessSmall corneal incisionLarge flap with femtosecond laserFrom the surface, flapless application
Laser approachA lenticule is created in the stroma and removedShaping with excimer laser under the flapExcimer laser ablation from the surface
Initial visual recoveryGenerally fast; varies from person to personGenerally fast; varies from person to personMore gradual, depending on epithelial healing
Ocular surface and corneaThe way they are affected differs because of the small incision and flapless structureThe flap and ocular surface findings are assessed separatelyEpithelial healing and surface comfort are monitored
Method selectionPersonalized according to corneal structure, prescription, ocular surface, occupation and lifestyle

How are results evaluated?

The success of a method is not evaluated only by the change in eye prescription. Visual quality, ocular surface comfort, night vision and follow-up findings are considered together. Results in different studies may vary according to patient selection, the system used and the length of follow-up; a rate reported in one study should not be interpreted as a guarantee of a personal result.

The choice between SMILE Pro, FemtoLASIK and surface lasers is based on a detailed examination. There is no single "best" method for everyone.

What can be expected during recovery?

In the first hours, stinging, watering, light sensitivity or fluctuating vision may be seen. The speed at which vision becomes clear varies from person to person. It is important to use the drops prescribed by your doctor on time and to follow the follow-up plan.

In the first days

  • Do not rub the eye
  • Avoid contact with water, soap and makeup
  • Wait for your doctor's approval before driving
  • Follow the protective recommendations given

Return to activity

  • Increase screen use according to personal comfort
  • Wait for the recommended period before sports and swimming
  • Protect the eye in dusty environments and where impact is possible
  • Do not miss the planned check-ups

More information about recovery after SMILE Pro

For details about vision becoming clear, daily life and follow-up, you can read the article on the recovery process after SMILE Pro.

Possible risks and limitations

No surgical procedure, including SMILE Pro, is free of risk or can have its results guaranteed. Temporary dryness, light scatter, halos, difficulty with night vision, visual fluctuation, inflammation, infection, undercorrection or overcorrection, and the need for additional treatment may occur.

The personal level of risk is related to the eye prescription, corneal characteristics, ocular surface, accompanying diseases and adaptation after surgery. For this reason, the benefits, alternatives and risks should be evaluated together with your doctor before the procedure.

Frequently asked questions about SMILE Pro

What is SMILE Pro?

It is a refractive surgery method based on removing a thin lenticule, created in the corneal stroma with a femtosecond laser, through a minimal incision; it is flapless and does not remove the epithelial layer over a large area.

Who can be considered for SMILE Pro?

In general, it can be considered in myopia and astigmatism patients whose eye prescription is stable and whose corneal structure and ocular surface are suitable. Definite suitability is determined by a detailed examination.

How long does the procedure take?

Although the laser stage is short, the total time, including preparation, the procedure and final checks, varies according to the person and the surgical plan.

Is there pain during the procedure?

The procedure is mostly performed with drop anesthesia. People may feel brief pressure or discomfort; the experience varies from person to person.

When can I return to daily life?

The speed of recovery varies from person to person. Although many people can return to their daily activities within a short time, your doctor's follow-up recommendations should be followed for work, driving and sports.

Is SMILE Pro or FemtoLASIK more suitable?

No single method is best for everyone. The method suitable for you is selected by evaluating corneal structure, eye prescription, ocular surface, occupation and lifestyle.

SMILE Pro suitability assessment in Denizli

In the assessment with Prof. Dr. Cem Yıldırım, the eye prescription, corneal structure, ocular surface and retinal findings are considered together. When coming to the examination, it is helpful to share your current glasses prescription and information about the medications you use. You can find out before your appointment how long to stop wearing contact lenses.

Denizli clinic contact and directions · Academic background of Prof. Dr. Cem Yıldırım

Scientific sources

The medical framework on this page has been prepared taking into account current device usage information, regulatory documents and peer-reviewed scientific publications.

Prof. Dr. Cem Yıldırım

Prof. Dr. Cem Yıldırım, who provides services in the field of eye diseases in Denizli, informs refractive surgery candidates by evaluating their corneal structure, ocular surface, refractive error, retinal findings and personal needs together, in line with his academic and clinical experience.

Explore the academic background

Last updated: